Help for exhibition stand design,
banner stands and exhibition graphics. 
If
you have a choice please create your artwork on a macintosh and supply
us with a quark xpress document, other programs are likely to incur
extra charges for file preparation. All files can be supplied to us
via F.T.P (please ask for details) or alternatively sent in on disk.
We need a print out for a guide in all cases in colour. If you are in
any doubt please contact us.
To create suitable digital artwork for
Banner stands, please follow the guidelines below:
Uno banner 2200 x 800mm
Blade 2155 x 800mm add 200mm for tongue
Baraccuda 2130mm x 800mm add 200mm for tongue
Excaliber 2145 x 800mm add 200mm for tongue
Imagine 2190mm
x 800mm add 200mm for tongue
Pod 2100x800mm, add 100mm for tongue
Apollo 2140mm x 800mm, add 100mm for tongue
Typhoon banner stand 800mm
x 2110mm add 100mm for tongue
Titanium 800mm x 2130mm add 200mm for tongue
Platinum 800mm x 2130mm add 200mm for tongue
Sidewinder 800mm x 2100mm. add 100mm for tongue
Stretch VT 800mm x 2000mm add 200mm tongue
Storm banner stand 620mm x 1800mm
Zero roller 2010mm x 850mm add 200mm for tongue
Zero Plus roller 2200mm x 850mm add 200mm for tongue
Create artwork at 50% of actual
size including tounge required on roller stands as per the table above.
.All files must be CMYK.
1. Create a single page document in Quark Xpress at 50% of finished
size with no bleed or crop marks.
2. Include all used fonts including those used in Logo’s and
eps files.We cannot print true types please outline or PDF these
files. No true types please
3. All Illustrator eps fonts to “outlines”.
4. We do not advise final output to be less than 150dpi Lower resolution
images may result in a pixalation effect on your panel.
5. All scans should be saved as a single file document (DCS off).
6. Please supply a colour proof with your disk. We cannot guarantee
the appearance of your panels without some visual reference. A
test print can be supplied by us at £10 + postage or courier however
this will cause a delay
We
can accept files on CD-rom and Iomega 100mb Zip Disks or via Email
and FTP please ask for details.
It is your
responsibility to supply a printed proof of all panels for
checking. Errors may
arise from PDF and Jpeg images for which we will not be held responsible.Pantones
are not a guaranteed match and we sugest a test print at £10 + postage
or courier at cost but this will cause a delay.
Digital Artwork Preparation for
pop up displays
To create suitable artwork for
pop up displays, please follow the guidelines below:
All
pop ups are defined by size and configuration. The configuration
will be 4x3 or 3x3 or 2x3. The first number refers to the amount
of drops, i.e. a “4x3” Front
Curved system will have 4 drops 673 mm wide x 2225 high, plus 2 end
panels 673mm wide x 2225mm high.
The artwork on one page at 25%
1. Create artwork at 25% of actual
size All files must be CMYK.
2. Create a single page document in Quark Xpress at 25% of finished size
3. Include all used fonts including those used in Logo’s and eps
files.
4. All Illustrator eps fonts to “outlines”.
5. All Scans should be placed in the 25% document at around 100% at 400dpi.
Lower resolution images may result in a pixelation effect on your panel.
6. All scans should be saved as a single file document (DCS off).
7. Place guides at the point that the panel will be split.
8. Please supply a colour proof with your disk. We cannot
guarantee the appearance of your panels without some visual reference
We can accept files on CD-rom
and Iomega 100mb Zip Disks, Email or FTP please ask for details
It is your
responsibility to supply a colour printed proof of all panels for
checking. Errors may
arise from PDF and Jpeg images for which we will not be held responsible.
Artwork Preparation for Digital
Printing
To output High Quality Digital
prints from your files please use the following guidelines:
We can accept files created in
the following programs
Quark Xpress 6 (Mac/PC)
PhotoShop 6 (Mac/PC)
Illustrator 9 (Mac/PC)
Adobe CS Suite
Files must be set CMYK.
Setup the panels in proportion to your panel and within an enlargement
of 400%
1. Images need to be maximum 150dpi
AT OUTPUT SIZE. I.e. if we are enlarging your image by 4x you will
need to supply the files at 600dpi for optimum resolution on smaller
panels (100 dpi is normally adequate for larger format output). Lower
resolution images can be printed but original quality and amount of
enlargement will affect the output.
2. Supply all images as CMYK
3. Include all used fonts including those used in Logo’s and eps
files.
4. All Photoshop scans should be saved as a single file document
(DCS off).
5. Please supply a colour proof
with your disk. We cannot guarantee the appearance of your panels without
some visual reference A test print can be supplied by us at £10
+ postage or courier however this will cause a delay
We
can accept files on CD-rom and Iomega 100mb Zip Disks, Email or FTP
please ask for details.
If you need any help please call
or email us
It
is your responsibility to supply a colour printed proof of all panels
for checking. Errors may
arise from PDF and Jpeg images for which we will not be held responsible. A
test print can be supplied by us at £10 + postage or courier
however this will cause a delay
|
