Lighting gantry junction with conicals, pins and clips.
Lighting gantry junction with conicals, pins and clips. thumbnail

Lighting gantry junction with conicals, pins and clips.

Product Options

S35T47 Turned leg, 4 Way Junction

S35T47

A turned leg junction in our trio lighting gantry, system 35 range, S35T47. This is a rather special turned leg junction, designed to be used to create a second tier display area of some kind in truss structures. It would most probably be seen in a six legged structure sending up a support to carry a central banner frame display area.

Note that the horizontal extending struts from the center of this gantry junction, you may need a 153mm straight beam to connect to your leg. Dims of 500mm x 500mm, supplied with the required conicals, pins and clips.

    £195.00

    Product available

    -
    +
    Contact Us

    Related Products

    Trio aerial lighting rig, 2m Trio circle.

    Aerial lighting rig 2m diameter circle Spigot and pin...£1,040.00

    S35 Gantry lifting eye for flying rigs

    S35 Gantry lifting eye for flying rigs Single gantry...£15.00

    32-35mm Truss clamp for lighting and many other accessories

    32-35mm lighting clamp 32-35mm gantry clamps for use with...£10.00

    S35TC41 cross junction for lighting truss SYS35.

    S35 Lighting Truss 4 way cross S35T41 System 35 Lighting...£155.00

    Three way apex down - right hand corner junction S35TC33

    S35 trio lighting truss 3 way apex down corner right hand...£130.00