CS01SR turntable for loads up to 1000 kilos. Heavy duty turntable.

CS01SR turntable with sliprings - 1000kgs

Belt drive display turntable

Suitable for large revolving displays


A heavy duty mains powered display turntable unit with a turn plate of 660mm square, the CS01SR carries a maximum centric load of 1000 Kilos, has a total height of 205mm, fitted with a mains cable length of 2M. Its Rotating speed is 1.2 RPM, rotating clockwise and is a very quiet operation. The turntable is belt drive and is also fitted with a slipping clutch to meet EU health and safety standards. 220-240V - 8 amp draw.

A powerful tapered roller bearing supports against big warping power with larger installations. This display drive uses a asynchronous Gear Motor: (torque 25 Nm), power consumption approx. 130w. Its slip ring is embedded and protected at the inside or outer edge of the turn plate. This display drive motor is also rated for external use to IP53 standard.

A speed convertor is available for this turntable but it will interrupt the slip ring power supply to making it non usable.

This turntable drive unit comes in a galvanised finish and weights 104 kilos, it ships in a packing case - 92 kilo's Supply time on these units is approx 2 weeks.

Please discuss your needs with our specialists, you may be asked to send a drawing with dimensions and weight calculation for your application, 01256 768178.

A range of custom options are offered with this unit by quotation please see the Pdf.

In Stock Secure online ordering