Skip to content
Free Standing Light box

Free Standing Light box

Free standing light box. This image shows the set up of one of our free standing light boxes with tension fabric graphics and a reflective rear cover sheet.

First set up your frame work, take out either from front graphics or rear cover sheet and find a top corner.

Press the silicone bead into the slot in the aluminium frames profile at various points, work down each side pushing it in at a few locations, now press in a few points at the base.

Now take your time and work back over the frame pressing in the rest of the fabric, this allows the fabric to form the correct tension and not create tight or loose areas on the display.

Now connect the power cable with transformer, switch on for a very catching illuminated display.

Previous article POS display stand
Next article Colour change lighting

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare